Convert a Wood Fireplace to Gas
3-5 Minutes to Read

So, you want to convert a wood fireplace to gas? Well, it’s possible and you have options!

Changing a fireplace to gas logs or installing a gas fireplace insert is a common home improvement choice that many homeowners have chosen in recent years.

If you’re motivated by enjoying a fire without the fuss, no longer need fireplace heat or if wood-burning has lost its appeal, then there are several options for getting started with a new gas fireplace. The results can be impressive.

What’s the Difference Between a Gas Insert and a Gas Fireplace

A fireplace is a “place” in which “fire” can be located and it must have a vent for smoke and exhaust to escape. A fireplace insert assumes you have a fireplace already.

An insert is inserted into an existing fireplace.

You cannot have a fireplace insert without first having a fireplace.

Since an insert needs a fireplace, it could be considered an accessory appliance with the intent of adding features and benefits lacking in the original system.

Inserts allow for additional heat not available with just a fireplace.


How Much Does Fireplace Conversion Cost?

The cost to convert a fireplace to gas is a major consideration. $150.00 will get you a set of gas logs with burner and parts. Installation and other options add to the total cost.

If you know the necessary steps, you’ll be able to burn gas in your fireplace in no time (and without breaking the bank). Or if you desire heat or a stunning appearance, you’ll need something more than the budget gas logs found on the internet.

First, let’s take a look at the cost benefits of different types of fireplace conversions, then you can choose what works best for your needs:

Gas Logs in an Existing Fireplace

Installing gas logs into an existing fireplace is possible in both prefabricated fireplaces and masonry chimney systems.

Heat Output: Medium to low (depending on vented or unvented gas logs)

Cost: From $150 to over $2,000 depending on the quality and installation

Time to Install: Installation could be less than half a day

There are two requirements we must keep in mind when converting a fireplace to gas using gas logs:

1. the availability of gas to the fireplace

2. does the condition of the existing fireplace support safe gas burning?


Gas supply, to an existing wood burning fireplace (masonry or prefabricated), is often already available. In the event, these fireplaces were not provided gas supplies at the time of installation, gas or propane can be run to the fireplace by a gas supply technician.

The exhaust of gas logs is invisible, therefore the damper must be fixed or removed. The flue vent must remain permanently open. The damper can be welded fully open and it is required by some jurisdictions. Check state and local codes.

Code requires that dampers be removed or “Locked open’ to ensure there isn’t an accidental use of the vented gas logs and asphyxiation of the occupants.

Regarding vented vs non-vented gas logs. Before choosing either, look at the local codes for your area, only have a Certified Technician first evaluate your fireplace and perform the installation.

If your conversion from wood to gas involves gas logs, check out our Pros and Cons of Ventless Gas Logs for additional helpful information.

Components needed to install gas logs into prefab or masonry fireplace

Convert to Gas Fireplace Insert

Installing gas logs into an existing fireplace is possible in both prefabricated fireplaces and masonry chimney systems.

Heat Output: Medium to high

Cost: Frequently as low as $1,200 plus parts and installation

Time to Install: 2-8 hours

The popularity of fireplace inserts shows how consumers have a high degree of satisfaction with this factory built hearth product. The installation of gas inserts into a wood burning system is a straight forward conversion, with the major considerations being:

1. clearance to combustibles

2. a functional gas supply

Steps to the gas fireplace insert conversion include:

Removal of the fireplace damper, providing 110-volt to the insert and pairing a remote control, to name a few. Because the existing chimney liner used by the wood fireplace is designed to burn only firewood, a gas fireplace insert would require the installation of a collinear gas insert liner in the fireplace flue to the chimney top.

Manufacturers approved termination (direct vent insert cap) is required to minimize animal and rain entry.

Convert a Prefab Fireplace to a Gas Insert:

Both gas fireplace inserts and prefabricated fireplaces and chimneys are built with safety in mind. So much so, that the manufacturers of these hearth appliances test their products prior to mass production and sale. The manual of both the fireplace and the gas insert must include the instruction indicating that installation of the gas insert into the wood-burning fireplace is acceptable and when. Included in this, would be specific instructions to avoid:

  • damaging or malfunction of the unitdamaging or malfunction of the unit
  • overheating nearby combustibles
  • creation of a carbon monoxide hazard that, if instructions where followed, could have been   avoided.

Absent clear instructions, installing a gas insert into a prefab fireplace (built to burn firewood) would not be approved and could threaten life and property with the very first use.

Check with local code officials for more information on keeping your home and family hearth safe.


Convert Existing Fireplace to Gas

Converting a wood-burning fireplace to a gas fireplace would also include removing the wood fireplace and chimney and installing a prefabricated gas fireplace with a chimney or vent system approved by the gas fireplace manufacturer.

Of the three types listed, this gas fireplace conversion is the most involved process but yields the most stunning results.

Prefabricated gas fireplaces (the direct vent fireplaces in particular) are some of the most visually stunning hearth products available. With options like a large viewing area, modern design and LED lighting to produce a stunning effect set against the glass media or gas logs.

As you may expect, nice things come at an additional expense. Cost is a factor with this choice because it involves substantial demolition, plus the purchase of a vent or chimney system in addition to the fireplace.

The new gas fireplace and vent replace the old system after the wood-burning unit is removed. Frequently, the gas fireplace conversion involves running of the gas supply, roofing, siding, and drywall dependant on the path the old fireplace takes through the home.

Installation requires the skill of a professional hearth technician, with even greater attention to clearance of combustibles to the gas fireplace insert because the vent is traveling through combustible portions of the home.

Convert Wood Fireplace to Gas Infographic
Tempered Fireplace Glass Bits

Animals in Chimney

Animals get stuck in chimneys all the time. The question is what can you do to prevent it? With warmer weather quickly approaching, our...

Here’s Why Your Gas Fireplace Stinks

Gas fireplaces offer convenience and warmth that is hard to get with traditional wood-burning fireplaces. But homeowners and hearth lovers...

Creosote Buildup in Chimneys

It’s falling into your fireplace or stuck to the walls. It can look dusty, puffy, flaky, or oily like tar. Is it soot,  is it ash? Not...

Why Does My Fireplace Smell? 

Perhaps your fireplace stinks after a fire. Maybe your fireplace smells in the summer or only when it rains. Foul odor near the hearth is...

What is a Fireplace Firebox?

To the inexperienced fireplace owner and operator, understanding the anatomy of their chimney system is complex. From the confusing...

How to Prime a Chimney Before Using Fireplace

As a homeowner, it's critical that you know how to prime a chimney before using your fireplace. Picture this: You decide to start a wood...

Roof Rust and Your Chimney

Chimneys are robust, tenacious, and highly beneficial home features; however, they’re susceptible to wear and tear over time like any...

Caution: Carbon Monoxide & Chimneys

If you have a fire or reason to suspect carbon monoxide is entering your home, get outside and call 911.  DO NOT re-enter the home until...

Got Bats in Your Chimney Flue?

Got bats in your chimney flue? If so, there are a few imperative things you need to know! As made famous in popular culture by the comic...

What is a Chimney Damper?

If you’re new to fireplace operation, one of the questions you’re likely wondering is, what is a chimney damper? Or even, how does a...

Pin It on Pinterest

Share This